Built with the finest materials available, our Camshaft Belt Drives feature several performance and valve train stability enhancements over traditional timing chains and gear drives. The Gates patented High Torq Drive™ reinforced belt spins dry on a steel crank pulley and a hard coated aluminum upper pulley and helps isolate crankshaft harmonics to the valve train. Teflon® coated high vacuum cam and crank seals are long lasting and insure the extreme amount of vacuum found in today’s race engines stays sealed in the crankcase. Cam timing can be externally adjustable ±10° in minutes to dial in the power curve and cam thrust can be reduced to as little as .001” with our available dual thrust cam adapter assemblies. Related Articles - Engine Ice’s Ice Water Racing Coolant - Erson Custom Ground Camshafts - Dart Fully Counterweighted LS Crankshaft
Another advantage to running our Camshaft Belt Drive is the ability to swap out cams directly through the front cover. Cam swaps can be performed quickly without needing to remove the oil pan by simply removing the upper cam pulley and un-bolting cam seal plate saving countless hours during dyno sessions. Worm Gearbox
Edelbrock’s Pro-Flo 4 Plus Self-Learning Engine Management System makes it easier than ever to swap a Gen III Hemi into your classic Chrysler, Dodge, or Plymouth car or truck. The self-learning ECU adjusts the fuel map as you drive, providing optimum performance with no need for laptop tuning or costly dyno sessions. You can use the
Edelbrock’s Pro-Flo 4 Plus Self-Learning Engine Management System makes it easier than ever to swap a Gen III Hemi into your classic Chrysler, Dodge, or Plymouth car or truck. The self-learning ECU adjusts the fuel map as you drive, providing optimum performance with no need for laptop tuning or costly dyno sessions. You can use the E-Tuner 4 Plus software to do real-time system programming, calibration adjustments, and performance monitoring with an Android tablet or smartphone.
Hot Shot’s Secret extends the company’s Adrenaline® Racing product line with a new competition diesel performance additive – ADRENALINE R82+™. Formulated for competitive off-road vehicles, ADRENALINE R82+ combines a powerful cetane improver with Hot Shot’s Secret’s new ADRENALINE Racing Top Lube fuel lubricant to decrease wear by up to 41% in ASTM testing. The result is a diesel
The design of Reid Machine’s rocker arms provides the stability required in Top Fuel, Blown Alcohol, Injected, Fuel, and Pro Mod categories.
Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life. Related Articles – Amsoil
Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says
Diamond’s Mercedes 6.2L M156 pistons are rated for 1,400 HP.
The Motown II can be bored to a maximum of 4.200″ with clearance for a 4.000″ crank.
Small footprints make these units ideal for job site “cell” cleaning applications or where space is critical.
A single-groove valve allows for more contact surface area, which leads to less friction.
Gear Operator Content for engine professionals and enthusiasts